First Response Conception Friendly Lubricant 40g

Directions and ingredients How To Use Directions for Using First Response™ Conception Friendly Lubricant with Disposable Applicators: 1. Remove seal from tube before initial use. 2. Can be applied up to 15 minutes prior to intercourse. Applying it before intercourse allows the moisturiser to disperse throughout the vagina and allows more spontaneity for you as a couple. 3. Attach the applicator to the tube by twisting the end of the applicator firmly onto the tube. 4. Gently squeeze the tube into the applicator, and continue squeezing until the applicator is full or the desired amount is present in the applicator. Most women will choose the 2 to 3gm fill line to meet their needs. Separate the applicator from the tube. Be sure to keep the open end of the applicator upright so no product is lost. After each use, replace the cap and roll up the tube from the bottom. Do not leave the tube uncapped between uses. 5. Do not store First Response™ Conception Friendly Lubricant in the applicator more than 30 minutes prior to use. This means if you draw lubricant into the applicator but do no insert it intravaginally within 30 minutes, the unused lubricant needs to be discarded and the applicator disposed of. 6. To apply the lubricant, gently insert the applicator deep into the vagina. This can be done while standing, lying down or sitting (such as on the toilet). 7. Holding the barrel of the applicator, slowly push the plunger all the way in to release the lubricant into the vagina. 8. Remove both parts of the applicator from the vagina. 9. In order to get the right amount of moisture for your body*, bear down slightly after depositing the product. This will expel any excess lubricant that your body doesn’t need. If desired, use a tissue to lightly wipe off any extra product that is on the vulva.10. Discard applicators following use. DO NOT REUSE APPLICATORS.

Ingredients Purified Water, Hydroxyethylcellulose, Pluronic, Sodium Chloride, Sodium Phosphate, Carbomer, Methylparaben, Sodium, Hydroxide, Arabinogalactan, Potassium Phosphate, Propylparaben